O-Ring Abutment

• Driver for Stud Abutment

• Cement-retained prosthesis• Abutment level impression• ø 4.8 : connect using a solid abutment driver (code : SDSL/SDSS)• ø 6.0 : connect using a 1.2 hex driver or solid abutment driver• Recommended...

• Cement/combination-retained prosthesis• Fixture level impression• Able to take abutment level impression using a retraction cap• Torque using a 1.2 hex driver• Recommended tightening torque: 30Ncm•...

• Cement/screw-retained type for temporary prosthesis• Used to make temporary prosthesis after prep• Fixture level impression• Torque using a 1.2 hex driver• Recommended tightening torque: 20Ncm...

• Screw-retained prosthesis in multiple scenarios• Angle compensation up to 60°• Torque using convertible abutment outer driver     ø4.0: torque using o-ring abutment driver (code :...

• Cement-retained/combination type prosthesis• Angle compensation up to 23° without trimming• Fixture level impression• Torque using a 1.2 hex driver• Recommended tightening torque: 20Ncm(mini),...

• Cement-retained prosthesis• Abutment level impression• ø 4.0: torque with the outer driver (code: ORDML/ORDMS)• ø 4.5/5.0/6.0: torque with the outer driver or 1.2 hex driver• ø 7.0: torque with a 1...

• Retains overdenture with O-ring system• Angle compensation up to 20°• Torque using O-ring driver (code: AORD)• Recommended tightening torque: 30Ncm (mini/regular)• Ball head diameter   –...