Octa Temporary Cylinder

• Screw-retained prosthesis• Customized prosthesis cast with non-precious alloys• Torque using a 1.2 hex driver• Recommended tightening torque: 20Ncm• Packing unit: cylinder + Ti cylinder screw (SSFS)

• Screw-retained prosthesis• Customized prosthesis cast with gold alloy• Cylinder melting point: 1400~1450°C• Torque using a 1.2 hex driver• Recommended tightening torque: 20Ncm• Packing unit:...

• Provisional prosthesis (Ti Gr-3)• Torque using a 1.2 hex driver• Recommended tightening torque: 20Ncm• Packing unit: cylinder + Ti cylinder screwEbonyGold Screw Product Code• GSFSM (Ø4.0 / Ø4.0)•...

• Used in fabricating a temporary prosthesis (Ti Gr-3)• Torque using a 1.2 hex driver• Recommended tightening torque: 20Ncm• Packing unit : cylinder + Ti cylinder screw• Ti cylinder screw product...

• Screw-retained prosthesis for multiple prosthetic options• Angle compensation of up to 60°• Use a dedicated outer driver (code: ODSL/ODSS)• Recommended tightening torque: 30Ncm

• Cement/screw-retained type for temporary prosthesis• Used to make temporary prosthesis after prep• Fixture level impression• Torque using a 1.2 hex driver• Recommended tightening torque: 20Ncm...

• A lab analog• Connect with a 1.2 hex hand driver

• Driver for Octa Abutments• Recommended tightening torque: 30Ncm

• Protective cap• Connect with a 1.2 hex hand driver• Packing unit: protect cap + Ti screw (SSFS)