Remover Body

• Grinds down narrow alveolar ridge, and creates an indentation for the fixture’s insertion site• Angled type recommended speed: 1,200 ~ 1,500rpm• Straight type recommended speed: 15,000 ~ 30,000rpm

• For seating and removing the prosthesis retained by the Locator F-Tx• Engaging and disengaging the Retention Balls from the F-Tx Abutments• Autoclavable, for multi-patient use

• Removes a fractured screw by engaging into the hole created by the Screw Removal Drill• Rotation direction: counterclockwise

• Only long length is currently available• Removes fractured or jammed abutments and mounts from the fixture• Insert into fractured abutment hole, turn counter clockwise, and rock back and forth to...

• Used to create a hole in the fractured screw• Make sure to connect the guide, irrigate and suction to remove any debris• Available in long and short lengths for different intermaxillary distances•...

• Scan body for custom prosthetics fabrication• For model scan: long (15mm)• For intra oral scan: short (10mm)• Tighten with a 1.2 hex hand driver• Packing unit: scan body + Ti screw

• TS multi abutment combination with multiple prosthetic options• Non-hex type• Torque using a 1.2 hex driver

Scan Body• Scan after connecting to a link abutment for CERECTM‚ or a scan post• Packing unit: scan body x 10ea.