Titanium Abutment Screw

Abutment Screw

• Cement-retained prosthesis• Abutment level impression• ø 4.0: torque with the outer driver (code: ORDML/ORDMS)• ø 4.5/5.0/6.0: torque with the outer driver or 1.2 hex driver• ø 7.0: torque with a 1...

• Retains overdenture with O-ring system• Angle compensation up to 20°• Torque using O-ring driver (code: AORD)• Recommended tightening torque: 30Ncm (mini/regular)• Ball head diameter   –...

• Cement-retained/combination type prosthesis• Angle compensation up to 23° without trimming• Fixture level impression• Torque using a 1.2 hex driver• Recommended tightening torque: 20Ncm(mini),...

• Screw-retained prosthesis in multiple scenarios• Angle compensation up to 60°• Torque using convertible abutment outer driver     ø4.0: torque using o-ring abutment driver (code :...

• Cement/combination-retained prosthesis• Fixture level impression• Able to take abutment level impression using a retraction cap• Torque using a 1.2 hex driver• Recommended tightening torque: 30Ncm•...

• Cement/screw-retained type for temporary prosthesis• Used to make temporary prosthesis after prep• Fixture level impression• Torque using a 1.2 hex driver• Recommended tightening torque: 20Ncm...

• Screw-retained prosthesis for multiple prosthetic options• Angle compensation of up to 60°• Use a dedicated outer driver (code: ODSL/ODSS)• Recommended tightening torque: 30Ncm

• Screw-retained type prosthesis• Customized casting prosthesis cast with gold alloy• Melting point: 1400-1450°C (2552~2642°F)• Fixture level impression• Torque using a 1.2 hex driver• Packing unit:...