Excellent Solid Burn-out Cylinder

• Solid abutment components that reproduce them on the model after impression taking• Sophisticated prosthesis can be produced inside• After casting, remove the lower part of the margin holding part

• Replacement of resin cap before wax up• Delivery of perfect margin with proper fitting after casting

• Cement-retained prosthesis• Ideal for molar cases due to its larger volume (compared to the solid abutment), trim as needed• Abutment level impression• ø 4.8 : connect using a 1.2 hex driver or an...

• An impression cap used when the solid abutment is trimmed• Used with an excellent solid shoulder analog and an analog pin

• Protects the solid abutment and minimizes patient irritation• Can be used as the base for a provisional crown

• Components that replace resin caps before wax up using excellent solid abutments• Connect to the appropriate color coded with solid impression coping

• Impression components for Excellent Solid Abutment• Possibility of precise prosthesis using lab analog• Color coded by abutment height   - H4.0mm: Yellow   - H5.5mm: Black ...

• Driver for Excellent Solid Abutments• Connect to the solid abutment by matching up the groove with the triangular indicator• Recommended tightening torque: 30Ncm

• Cement-retained prosthesis• Abutment level impression• ø 4.8 : connect using a solid abutment driver (code : SDSL/SDSS)• ø 6.0 : connect using a 1.2 hex driver or solid abutment driver• Recommended...