Rigid Burn-out Cylinder

• Solid abutment components that reproduce them on the model after impression taking• Sophisticated prosthesis can be produced inside• After casting, remove the lower part of the margin holding part

• Excellent solid abutment components that reproduce this on the model after impression taking• Sophisticated prosthesis can be produced inside• After casting, remove the lower part of the margin...

• Cement-retained prosthesis• Abutment level impression• ø 4.0: torque with the outer driver (code: ORDML/ORDMS)• ø 4.5/5.0/6.0: torque with the outer driver or 1.2 hex driver• ø 7.0: torque with a 1...

• Protects the rigid abutment until applying the final prosthesis• Can be used as the base for a provisional crown• Available for transfer abutment (ø 4.0 excluded)• Unavailable: Ø7.0 x 4.0mm and Ø7...

• Driver for Rigid Abutments• Recommended tightening torque : 30Ncm

• Impression components for rigid abutment• Color coded by height    4.0mm: Yellow    5.5mm: Grey    7.0mm: Blue• Available for transfer abutment (ø 4.0 excluded)•...

• Replicate of Rigid abutment for accurate orientation on model after impression• Color coded by height    4.0mm: Gold    5.5mm: Silver    7.0mm: Blue• Unavailable: Ø7.0...

• Used for accurate margin reproduction when taking a direct impression• Can be used as the base for a provisional crown• Available for transfer abutment (ø 4.0 excluded)• Unavailable: Ø7.0 x 4.0mm...

• Block-out spacers used on the heads of the locator abutments.• Seals gap between denture cap and abutment• Packing unit: 20ea