Depth Gauge for EM(MS) Kit

• Parallel pin is used to confirm the path of the implant after drilling• MSPP: lower diameter ø1.5 / upper diameter ø1.8• MSPPN: lower diameter ø1.5 / upper shape is same as the abutment portion of...

• Laser markings on drill match implant length specifications (8.0 / 10.0 / 11.5 / 13.0 / 15.0 mm)• In cortical bone, it is recommended to use the lance drill to drill to the final implant length•...

• Laser markings on drill match implant length specifications (8.0 / 10.0 / 11.5 / 13.0 / 15.0 mm)• In cortical bone, it is recommended to use the lance drill to drill to the final implant length•...

• Checks for access into the sinus cavity and measures the thickness of residual bone

• Release a wedged Expansion drill stuck inside the bone on the way out• Use with an open wrench to turn the hex of the Expansion drill• Prevents from over torquing

• Release a wedged Expansion drill stuck inside the bone on the way out• Use with an open wrench to turn the hex of the Expansion drill• Prevents from over torquing

• Check if access is gained to the maxillary sinus• Gauge height of residual bone• For use with a stopper for safe membrane approach• Same depth marking lines as on a 10mm drill

• Stopper number is total length when engaged• When the 7mm CAS drill is used, the protruding length is indicated in blue on the OneCAS kit.• When 10mm drill is used, the protruding length is...

• Anterior Narrow Ridge optimized for MS Fixture placement• Used to place MS Fixtures for the mandibular anterior and narrow bone width areas• Used for MS Fixtures(Narrow Ridge, Denture) placement•...