Twist Drill for EM(MS) Kit

Description

Description

• Laser markings on drill match implant length specifications (8.0 / 10.0 / 11.5 / 13.0 / 15.0 mm)
• In cortical bone, it is recommended to use the lance drill to drill to the final implant length
• Long type has a stopper at 13mm

View AllClose

Lance Drill for EM(MS) Kit

• Laser markings on drill match implant length specifications (8.0 / 10.0 / 11.5 / 13.0 / 15.0 mm)• In cortical bone, it is recommended to use the lance drill to drill to the final implant length•...

Parallel Pin for EM(MS) Kit

• Parallel pin is used to confirm the path of the implant after drilling• MSPP: lower diameter ø1.5 / upper diameter ø1.8• MSPPN: lower diameter ø1.5 / upper shape is same as the abutment portion of...

Depth Gauge for EM(MS) Kit

• Left: to check the drilled depth• Right: to bend the neck of the EM (MS) provisional type• MS narrow narrow ridge type cannot be bent

Twist Drill for ESSET Kit

• Marks the fixture’s insertion site• Controls depth with the built in stopper• Recommended speed: 1,200 ~ 1,500rpm

Ø2.2 Twist Drill for CAS Kit

• Recommend to under-drill by 1mm below the floor of the sinus• Use with stoppers for safe and controlled drilling• Apex tip measures an additional 0.6mm

Ø2.2 Twist Drill for Parallel Guide Kit

• Drills the hole in the stone model for the guide pin• Number of usages: 10 times• Drill after marketing the site with the round bur• Recommended speed: 1,200 ~ 1,500rpm

Twist Drill for SmartGuide

• Ø2.2 is currently not available• Drills specifically for SmartGuide• Stable drilling through the SmartGuide sleeve• Initial drilling using the ø2.2, followed by ø3.0 drill• Recommended speed: 1,200...

MS Kit

• Anterior Narrow Ridge optimized for MS Fixture placement• Used to place MS Fixtures for the mandibular anterior and narrow bone width areas• Used for MS Fixtures(Narrow Ridge, Denture) placement•...

OneCAS Ø2.2 Twist Drill for F5.0(w)

• Recommended to drill 1mm under the lower margin of maxillary sinus• For use with a stopper for safe membrane approach• 1mm shorter than the twist drill in the Taper Kit

Twist Drill for EM(MS) Kit

Description

Related Products