Repair Torque Driver

• Driver for torque wrench• Tip holding function• May bend or break if excessive torque is applied• Damage is possible even at low torque if not fully engaged• Apply vertical pressure when applying...

• Torque driver for Locator Abutments

• Driver for torque wrench• No holding function• Recommended tightening torque: 30Ncm (excessive torque causes fracture)• Do not remove tube to prevent fragmentation when broken• Recommended number...

• Used for initial insertion by hand after fastening to torque driver

• Driver for EM(MS) implants: denture• The triangular marking is used in line with the implant

• Driver for EM(MS) implants: narrow ridge & provisional• The triangular marking is used in line with the implant

• Tightens Screw Driver and removes the fixture using the Remover Body• Applies up to 400Ncm of torque (markers at 80/100/200/300/400Ncm)• Torque by pulling the bar back until it reaches the desired...

• Extends the length of the screw driver and remover body (by 10mm)