Torque Driver Handle

• Torque driver for Locator Abutments

• Driver for torque wrench• Tip holding function• May bend or break if excessive torque is applied• Damage is possible even at low torque if not fully engaged• Apply vertical pressure when applying...

• Driver for torque wrench• No holding function• Recommended tightening torque: 30Ncm (excessive torque causes fracture)• Do not remove tube to prevent fragmentation when broken• Recommended number...

• Reduced diameter of shank compared to the Torque Driver (Ø2.1 → 1.6)• The diameter of the screw hole can be minimized during prosthetic repair or SCRP procedures

• Driver for EM(MS) implants: denture• The triangular marking is used in line with the implant

• Connects to the Torque Driver

• Driver for EM(MS) implants: narrow ridge & provisional• The triangular marking is used in line with the implant

• Tightens Screw Driver and removes the fixture using the Remover Body• Applies up to 400Ncm of torque (markers at 80/100/200/300/400Ncm)• Torque by pulling the bar back until it reaches the desired...