Twist Drill for ESSET Kit

• Used to split alveolar bone and narrow ridge expansion it without any damage• It is a surgical kit used to ridge split the Narrow Ridge and expand it in order to place a F4.0~F4.5 Implant• Ridge...

• Release a wedged Expansion drill stuck inside the bone on the way out• Use with an open wrench to turn the hex of the Expansion drill• Prevents from over torquing

• Use to apply torque to the Expansion Drills

• Laser markings on drill match implant length specifications (8.0 / 10.0 / 11.5 / 13.0 / 15.0 mm)• In cortical bone, it is recommended to use the lance drill to drill to the final implant length•...

• Recommend to under-drill by 1mm below the floor of the sinus• Use with stoppers for safe and controlled drilling• Apex tip measures an additional 0.6mm

• Drills the hole in the stone model for the guide pin• Number of usages: 10 times• Drill after marketing the site with the round bur• Recommended speed: 1,200 ~ 1,500rpm

• Ø2.2 is currently not available• Drills specifically for SmartGuide• Stable drilling through the SmartGuide sleeve• Initial drilling using the ø2.2, followed by ø3.0 drill• Recommended speed: 1,200...

• Recommended to drill 1mm under the lower margin of maxillary sinus• For use with a stopper for safe membrane approach• 1mm shorter than the twist drill in the Taper Kit

• Recommended to drill 1mm under the lower margin of maxillary sinus• For use with a stopper for safe membrane approach• 1mm shorter than the twist drill in the Taper Kit