Torque Connector

Torque Extension

• Extends the length of the screw driver and remover body (by 10mm)

• Tightens Screw Driver and removes the fixture using the Remover Body• Applies up to 400Ncm of torque (markers at 80/100/200/300/400Ncm)• Torque by pulling the bar back until it reaches the desired...

Repair Torque Driver

• Reduced diameter of shank compared to the Torque Driver (Ø2.1 → 1.6)• The diameter of the screw hole can be minimized during prosthetic repair or SCRP procedures

Torque Driver Handle

• Used for initial insertion by hand after fastening to torque driver

Angled Torque Driver

• Driver for torque wrench• No holding function• Recommended tightening torque: 30Ncm (excessive torque causes fracture)• Do not remove tube to prevent fragmentation when broken• Recommended number...

Torque Driver for ET

• Driver for torque wrench• Tip holding function• May bend or break if excessive torque is applied• Damage is possible even at low torque if not fully engaged• Apply vertical pressure when applying...

Locator Torque Driver

• Torque driver for Locator Abutments

Torque Driver for Denture Type

• Driver for EM(MS) implants: denture• The triangular marking is used in line with the implant

Torque Wrench for ESSET Kit

• Use to apply torque to the Expansion Drills

Torque Connector

Description

Related Products